NDT Course Fees

JANUARY - DECEMBER 2018

Liquid Penetrant Inspection
32 hour course Level I & II $1,250

Radiation Safety
40 hour course $1,250

Magnetic Particle Inspection
32 hour course Level I & II $1,250

Ultrasonic Thickness Testing (UTT)
24 hour course $1000

Ultrasonic Inspection
40 hour course Level I $1,450
40 hour course Level II $1,450

Phased Array Ultrasonic (PAUT)
80 hour course Level II $3200 ($1600 / 40hrs)

Time of Flight Diffraction (TOFD)
40 hour course Level II $1595

Computed Radiography
40 hour course Level 1 $1600
40 hour course Level 2 $1600

Visual Inspection
24 hour course $1,000

Eddy Current Inspection
40 hour course Level I $1,425
40 hour course Level II $1,425

Thermal Infrared (TIR)
SNT-TC-1A
32 hour course Level 1 $1795
34 hour course Level 2 $1795
NAS 410
20 hour course Level 1 $1495
40 hour course Level 2 $1895
AAR C-III, M-1002, Appendix T
24 hour Level 1 & 2 $1550

Certified Weld Inspection Exam Prep*
40 hour course $1,600

Radiographic Inspection
40 hour course Level I $1,395
40 hour course Level II $1,395

Bubble Leak Testing
6 hour course $1000

NDT 101
8 hour course $750

Welder Workmanship (meets NSTP-248)
6-8 hour course $750

Hardness and Conductivity Testing
6-8 hour course $750

Level III Review/Exam Prep*
Basic (40 hours) $1,500
UT (40 hours) $1,500
RT (40 hours) $1,500
ET (40 hours) $1,500
Penetrant (24 hours) $1100
Magnetic Particle (24 hours) $1100
Visual (24 hours) $1100

Qualification Exams
Level III
SNT-TC-1A OR NAS 410 $1,500
NAS 410 & SNT-TC-1A $2000
Retake Failed Exam $500 / exam

Level 1 or 2
General, Specific and Practical $750
Retake Failed Exam (Level 1 or 2) $250 / exam

Specific Exams:
Creation of Company Specific (NADCAP) $1,000
Creation of Company Specific (ASNT) $850
Creation of new Specific for Failed Exam $500

Level III Consulting Fees
Consultant $175/hr
Senior Consultant $200/hr
Please contact us in regards to Level III Representation

Review of Personnel Qualifications
When qualification exams administered by QTS: $250
When qualification exams administered elsewhere: $500


TERMS & CONDITIONS

  1. All courses are prepaid.

  2. All consulting fees are due upon receipt. Consulting deliverables will be turned over after payment is received.

  3. Payment may be made by check payable to Quality Testing Services, cash or by credit card. MasterCard, Visa and American Express are accepted. Payment made by American Express will be charged a fee of 4.0% of the total paid by card. Payment made by Visa or MasterCard will be charged a fee of 3.5% of the total paid by card.

  4. Start time for all classes held at QTS is 9:00 A.M. on the first day of class.

  5. Large on-going jobs or when prior arrangements are made, may be reduced accordingly.

  6. All consulting rates are portal to portal.

  7. Work in excess of 8 hours Monday through Friday and on Saturdays may be charged at 1.5 times the regular rates. Work on Sundays and holidays may be charged at 2 times the regular rates.

  8. Minimum charges for consulting: One (1) hour for work performed in-house. In town, onsite labor of 4 hours or less is billed at a four (4) hour minimum rate. Out of town onsite labor of 8 hours or less is billed at an eight (8) hour minimum rate. On-site labor in excess of the minimum hours will be billed at the standard hourly rates.

  9. The Rates, Terms and Conditions set forth in this document are subject to change without notice.

Travel
Vehicle Mileage Charge: $1.00 / mile
Air Transportation / Car Rental / Hotel / Supplies / Additional Expenses: Actual cost + 15%
Per-diem: $75.00 per day
Travel Time: $115.00 per hour

Cancellation Policy
Quality Testing Services must be notified of cancellation at least ten (10) full working days prior to the first day of the course. Otherwise, only 50% of the course fee will be refunded. No refund will be issued if cancelled after the fifth working day prior to scheduled course start date. If Quality Testing Services cancels a course, we will provide at least five (5) days’ notice and will issue a full refund.

In-Plant Training
These courses are tailored to your exact requirements and can cover one topic or several. Quotations/proposals for in-plant training are supplied upon request.

* Does not include all required reference materials. Call for a list of required materials. Price is for each class.













EXCEPTIONAL SERVICE. DELIVERED.

PITINC_website_v2.jpg
 
Screen Shot 2019-01-29 at 7.28.13 PM.png

Quotations / proposals for in-plant training and customized courses!


WANT TO LEARN MORE?

For Inquiries or to Register/Enroll

Name *
Name
Phone
Phone

TESTIMONIALS FROM STUDENTS

Jason A.

“The real world inspection methods were a great idea. It was bit of a hiccup when Max had to leave for a meeting on day 2. All in all he did a great job covering everything and answering all questions we had. Subject matter was on point and had a nice flow daily. Advice hold on to this trainer and maybe give him a raise!”

Joe B.

‘Max is a very good instructor. He seems to know the material well and did a very good job explaining the different indications and terminology.’